Which model is it? As far as I’m aware all the Unifi APs need the controller for config. It doesn’t need to stay running unless you want a couple features for large deployments but you do need to run it to set things up initially. The Air Max / uisp lines are the ones with web based config.
Do you have a continuously running unifi controller or is it only running when you do the config? Does it do the same thing with the controller opposite to how it is now (ie if you aren’t running it does it do it when you leave the controller on)?
Are you running the 2.4 and 5 as separate SSIDs or the same one?
Are you on the latest controller and firmware?
Custom keyboards took off because of mechanical switches. Back in the day people wanted mechanical switches because they last longer than membrane ones, and so you wound up with a bunch of companies producing relatively easy to manufacture mechanical switches. Those switches all felt and sounded a little different so you got people who wanted a specific feel and sound and it grew from there.
There hasn’t really been the same push with mice because even really cheap ones work really well. Optical sensors are way harder to produce than key switches, and while there are a few different ones on the market other than dpi and polling rate they kind of all act the same - it kind of either tracks right or it doesn’t. There’s no differentiation unlike switches that are “tactile” or “linear” or “scratchy”. And because of size restrictions you can’t really have the same kind of switches as keyboards use for the buttons. And unlike the really niche keyboard people who do their own PCB and machine their own case, making a good mouse on your own from scratch is way more difficult. They’re weird shaped and it’s much more difficult to change things like optical tracking algorithms compared to macros on a 40% keyboard. You can do a run of 100 super niche keyboards and make it work, but just the injection molds for one mouse mean you need to make 10000, which stops it being a project and makes it a business.
There are premium mice manufacturers, but in general they either are going super light, super ergonomic, or super functional - and honestly they have a hard time competing with a company like Logitech that can produce really similar features for a fraction of the cost and have a decent reputation to boot.
I believe you can change the scaling algorithm obs uses? Right click the source and go to “scale filter” is what Google is telling me, not at a computer right now. I think it defaults to bicubic which should be ok though? The switch does its own internal scaling a lot of the time and that can look pretty bad though, but unless you get into some serious shenanigans that’s basically baked in.
I think it’s a conflation of the ideas of what copyright should be and actually is. I don’t tend to see many people who believe copyright should be abolished in its entirety, and if people write a book or a song they should have some kind of control over that work. But there’s a lot of contention over the fact that copyright as it exists now is a bit of a farce, constantly traded and sold and lasting an aeon after the person who created the original work dies.
It seems fairly morally constant to think that something old and part of the zeitgeist should not be under copyright, but that the system needs an overhaul when companies are using your live journal to make a robot call center.
This seems to largely be a “retelling” of an original story from NPR from 2021. The original has significantly more information from actually interviewing the owner of the project.
The original story from NPR says that they’re able to drive their tractor between the panels. It’s interesting that the project could essentially be described as an end run around a historic designation though. They put 1.2 MW of solar up, and from reading between the lines it seems that’s how they’re making money, the farming seems to be much more of a side thing that they’re required to do for historic reasons.
Not an expert, but my gut reaction is not really. The panels themselves are largely glass, aluminum and silicon, with fairly small amounts of doping agents. There are electronics but since they’re outside they’re largely encased in something, wiring which would be plastic and copper or possibly aluminum, and then the structure itself which is going to be steel and concrete.
Solar panels are significantly more sturdy than one would think given they are essentially a giant piece of glass. They’re usually rated to 12mm hail or more, which would normally absolutely devastate a crop. They don’t really go bad either they just become less efficient over time. There’s no moving parts to wear, no liquids, and in some designs very little in the way of electronics to go bad.
Essentially, I wouldn’t be surprised if there would be more harmful contamination from a diesel tractor driving around in the field or from a nearby coal power plant than from any kind of solar array as long as it didn’t have like, lead legs or something.
That being said, these kind of projects have been shown a lot but they’re unlikely to be used in most large scale farming - they usually interfere with any machines used to plant or harvest, and are only really well suited to a few crops. Parking lots are a much easier target for this type of solar project.
Ah, ok. The Unifi stuff is a bit weird like that. I recommend installing the controller on a computer if you continue to have issues. You don’t have to run it all the time, just use it for config and then turning it off is fine. It’ll give you way more information and control over exactly how the AP is set up.