Awesome, gonna bookmark those for later. Thanks!
Awesome, gonna bookmark those for later. Thanks!
No problem. The one I used is an ESP32 DevKitC, and you can find info about it on Espressif’s site, or just google the pinout diagram. For basic tasks it should be all you need since it has lots of binary pins, two ADC channels, two DAC channels, realtime clock, special pins for waking it from deep sleep, two I2C, etc. Though if you want to do video input you probably want something else, I’m learning.
Anyway, if you can spare the money to get one just to toy with I’d definitely recommend it.
Okay so that is an issue with the ESP32, sure. There are a lot of variants.
So from what I can tell, the ESP32 is the SoC chip and what you usually get is a dev board which has that plus a bunch of power regulation bits, a USB connector and UART so you can easily program it, etc. That part varies mostly by pinout. I.e. Same features, different pin location.
There are also variants of the chip, but those are usually more costly and will be named things like ESP32-S2.
Every one I’ve seen can run off 5v or 3.3v and uses the latter for logic, so if you got yourself an arduino kit and then just bought an ESP32 dev board it would almost certainly work with whatever is in the kit. Both are microcontrollers, not microprocessors, so they tend not to have OSes or screens.
Oh interesting. Can you link the detector? I could use that for something else.
When you put mail in the box, unless it’s a REALLY small bit of mail it’ll land so it obscures at least one of the proximity sensors. This then sets the ‘got mail’ statue to ‘on’ in Home Assistant. From there, I have HA set up to send me notifications to go and check the mail.
Before you say so, yes this was a lot of work for something so trivial, but it was fun. Plus I actually get so little physical mail that I can forget to check the mailbox for weeks at a time. Which would be very bad if I got some actually important mail. And actually, that exact thing happened just days after I finished installing the thing. So it has already potentially saved me from a fine.
I’m sorry to say I don’t. :/ You can grab dev boards off aliexpress for cheap, and they’re really easy to play with. Just connect the to your PC via USB to load your initial ESPHome script, and they spring to life. From there you can do basic testing, since they’ll get power from the USB. It’s just a matter of what you decide you want to hook up to them after that. I assume you’re looking for like a hobby kit, like you can get for arduino boards? Something that comes with a bunch of LEDs and I2C components you can fiddle with? Unfortunately I don’t know of any that come with ESP32 dev boards, but I’ll admit I’ve not looked. Sorry.
The article says it works by messaging systemd to run the process as the given user, rather than being a SUID binary. So it wouldn’t work without systemd.
I did this ages ago now. Was a non-issue.
Edit: To clarify, I’m not endorsing MS on not fixing this. Just saying I did it and had no issues.
Addictive is right. I’m in the process of building myself a smart mailbox with a couple proximity sensors and an ESP32. It’s been quite the undertaking, and quite expensive if you count the tools I bought for the project.
I know vlans is the answer, but I don’t know how to set it up. I really need to do this with my own network some day. There must be an OPNsense guide for this, I know it…
Racial bias in, racial bias out.
Until someone can explain to me how I can transfer, manage and control my passkeys without syncing them to some hostile corporation’s cloud infrastructure, passkeys will remain a super hard sell for me.
I dunno what you guys are doing that makes your nextcloud die without touching it. Mine runs happily until I decide to update it, and that usually goes fine, too. I don’t use docker for it, tho.
Hey, that guy is listening to Pink Floyd in his head without paying a licensing fee!!
The ATO’s myTax system is pretty great, I hope with this you guys finally get something as nice.