EDIT : I’m going to use a Lenovo P500 (at around $130) with 8 threads (will upgrade it later) and 64gb of RAM. It support the E5 v4 family so that’s great. If someone knows the power consumption, that would be cool!

Hello, I want to build a “homelab” and I’m searching for a server, what do you propose me as good options? I need something with at least 64gb RAM, can buy used, and minimum 16vcores… Around 150$ If you have any good options let’s comment below 👇 THX ❤

    • PeachMan@lemmy.world
      link
      fedilink
      English
      arrow-up
      69
      arrow-down
      3
      ·
      7 months ago

      Looking for recommendations for a racecar, at least 800 horsepower. Needs to hit 60 mph in under 4 seconds.

      My budget is $2000. Please give recommendations.

      LOL

      • seang96@spgrn.com
        link
        fedilink
        English
        arrow-up
        11
        ·
        7 months ago

        The hidden cost of power usage could be a lot more expensive then something more modern though lol

        • Celestus@lemm.ee
          link
          fedilink
          English
          arrow-up
          5
          ·
          7 months ago

          Agreed. 100% would not recommend going this route for a homelab, but it does meet every specified requirement

          • seang96@spgrn.com
            link
            fedilink
            English
            arrow-up
            1
            arrow-down
            1
            ·
            7 months ago

            https://psref.lenovo.com/syspool/Sys/PDF/ThinkStation/ThinkStation_P500/ThinkStation_P500_Spec.PDF

            Got a 490W or 650W PSU. Looks like the CPU is probably around 9-10 years. I’d say probably not much. I bet it’s idling would be around 120-200W depending on # of disks, disk type, and if your using the PCI slots.

            For reference I’m running 4 Intel NUC11i7s, $400/unit bare metal, 64GB ram (2x32) $120-$130, and the most expensive part is the flash storage I am buying to fit my needs. Power on these are like 10W idle and max is like 60W each when using turbo.

            • foremanguy@lemmy.mlOP
              link
              fedilink
              arrow-up
              2
              arrow-down
              1
              ·
              7 months ago

              do you think that this thing would be around 150W?? I think more about 50W Max, for example the cpu is relatively low-power

              • redcalcium@lemmy.institute
                link
                fedilink
                English
                arrow-up
                3
                ·
                edit-2
                7 months ago

                For comparison, I run a thinkstation p300 with i7-4790 (TDP 84W) 24/7 and the power usage looks like this:

                Even when idling this old processor still guzzles 45W. Certainly not as nice as GP’s that only use 10W during idle.

              • seang96@spgrn.com
                link
                fedilink
                English
                arrow-up
                0
                ·
                7 months ago

                I am not the best at estimating power usage but like I said depends on the configuration it has. That’s just CPU, not including powering everything else so it’s idle load will be higher. RAM, disks, type of disk, amount of disks, GPU or other PCI cards, etc every additional component adds to the idle watt usage.

                • foremanguy@lemmy.mlOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  arrow-down
                  2
                  ·
                  7 months ago

                  for sure but even with all my stuff I think that something like that would draw around 40-50W idle and up to 90W running

                • foremanguy@lemmy.mlOP
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  arrow-down
                  1
                  ·
                  7 months ago

                  Do you think it would be better to go to an consumer cpu instead of a xeon?

      • redcalcium@lemmy.institute
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        7 months ago

        Xeon E5-2670, with 115W TDP, which means 2x115=230W for the processor alone. with 8 ram modules @ ~3W each, it’ll going to guzzle ~250W when under some loads, while screaming like a jet engine. Assuming $0.12/kwh, that’s $262.8 per year for electricity alone.

        Would be great if you have an isolated server room to contain the noise and cheap electricity, but more modern workstation should use at least 1/4 of electricity or even less.

        • foremanguy@lemmy.mlOP
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          2
          ·
          7 months ago

          I just want to correct something is that the TDP is the power under load, so if the cpu is not 100% used it could be 20 hours at 25W and 4 at 90W

          • redcalcium@lemmy.institute
            link
            fedilink
            English
            arrow-up
            2
            ·
            7 months ago

            Power scaling for these old CPU is not great though. Mine is slightly newer and on idle it still uses 50% of the TDP.

      • SeaJ@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        If they are up for that, I’d be happy to part with mine for cheap. They’d need to get an E5-2650 (v2) to meet their 16 core requirement but a pair of those are pretty cheap.

      • Appoxo@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        Wouldnt bother with Gen8. We literally throw them in the e-waste recycle bin.
        Either get a Gen9 if tight with cash (also EOL) or Gen10 servers which are currently supported and get current updates.

  • cmnybo@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    33
    arrow-down
    1
    ·
    7 months ago

    At that price, the hardware will be ancient and you will spend more on electricity in a year than you spent on the server.

        • Appoxo@lemmy.dbzer0.com
          link
          fedilink
          English
          arrow-up
          1
          ·
          7 months ago

          Not the cores but you can get 2x16gb sodimms for something like an Intel (now Asus) NUC. But that won’t be cheap lol.
          Dunno if there are 2x32gb kits but maybe some higher end mini-pc has 4 bank ram or even full length dimms.

  • gravitas_deficiency@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    30
    arrow-down
    1
    ·
    edit-2
    7 months ago

    Lmao dude thats simply not happening at that price.

    You could get part of the way there with an old Dell server, but you’re probably gonna be paying closer to 2-300 for a decently spec’d one like you’re describing. You’re probably gonna be looking at a 10 year old twin quad core setup with a tdp of like 500W combined for JUST the cores. Your power bill is going to murder your budget, even if you somehow find a magical deal on the box.

    • SeaJ@lemm.ee
      link
      fedilink
      English
      arrow-up
      2
      ·
      7 months ago

      You can usually find HPs for cheaper although they are pretty picky on what they work with. For some reason, HP decided that it will work with stuff they have not certified but the fans will constantly be at 100%.

      • foremanguy@lemmy.mlOP
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        7 months ago

        I’ve edit the post with what I found, seems good and be more power efficient

  • Tylerdurdon@lemmy.world
    link
    fedilink
    English
    arrow-up
    24
    ·
    7 months ago

    Bear in mind, a system that is built to be a dedicated server will be meant to crunch data. That means 2 things:

    • loud fans

    • heavy electricity use

    If you just want a lab, I suggest getting a desktop PC and loading a server OS on it. Practical hardware experience isn’t too valuable because platforms change and they usually make them super simple to maintenance with lots of online support. Getting a desktop will also save you some bread on initial investment.

    • lemmyvore@feddit.nl
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      7 months ago

      A self-hosting server does not necessarily crunch data and it doesn’t have to have loud fans or use lots of power. It can idle in the 15-20W range with an Intel CPU and if you put the HDDs on standby when idle.

      • Tylerdurdon@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        7 months ago

        Yep, I’m speaking in generalities. Overall, my point is that a homelab doesn’t need something expensive because it may not be heavily used, so most of those features are not necessary. If the guy had mentioned running a business or customers, that’d be a different story.

        You even had to qualify your own statement that one has to modify hard drive power consumption to achieve acceptable noise levels.

        I had a SIEM running on a mini-pc like a champ. It cost me fifteen bucks and taught me a lot. Build to requirement, not title.

  • slazer2au@lemmy.world
    link
    fedilink
    English
    arrow-up
    20
    ·
    7 months ago

    Honestly that sounds overkill for someones. First time into self hosting.
    I would start with something like a Nuc or a secondhand 1 liter PC (dell optiplex/HP elite mini/Lenovo ThinkCenter) which are dirt cheap on eBay.

    Do you have an indication of what you want to run that requires that mid range gaming setup?

    • HegemonSushi@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      ·
      7 months ago

      Definitely agree. If you need to spin up a bunch of discrete VMs for labbing, that’s one thing, but noise, cooling, power consumption, and space all come into play for dedicated hardware. I host a variety of services and they all run on small, low energy hardware (which is often pretty cheap). I just spun up a matrix server on a $100 ebay HP ProDesk which has plenty of power (probably enough to deploy my whole stack).

  • tomten@lemmy.world
    link
    fedilink
    English
    arrow-up
    18
    ·
    7 months ago

    Unless you have use case for that much horsepower I would suggest, like others here, buy a mini PC as a start and if you need more down the line buy a second one. They are cheap, fairly quiet and don’t use much power.

  • Revv@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    17
    ·
    7 months ago

    The only option that fits your budget today I can think of would be picking up one of the old xeon combos off of AliExpress. I spent like $100 on a MB+CPU+64GB DDR4 combo with a 2880 v4 I think. 14c/28t at any rate. You can probably grab a case/power supply/video card used for under $50 on eBay.

    Please note that I’m not saying that this is a good option; it took a lot of fiddling for me to get mine running smoothly. But if you’ve got more time and patience than money, it might work for you.

  • Lemmchen@feddit.de
    link
    fedilink
    English
    arrow-up
    11
    ·
    7 months ago

    I’d recommend to go with some form of mini PC. If you don’t need much CPU power there are some very cheap N100 ones where you can upgrade the RAM.

    • just_another_person@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      ·
      7 months ago

      N100 are low power, but quite capable of doing most things you’ll be asking a simple service box to do for you. Good option, and cheap.

      • Lemmchen@feddit.de
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        Yes, the only real drawback is the single channel memory connection, but that’s rarely a bottleneck.

  • julianwgs@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    7 months ago

    Are you just starting out? I got started with home labbing with a Raspberry Pi 2B (1GB RAM!) and an external HDD I had lying around. I host Yarr, Navidrome, backups and a dashboard app Ive written on there and I am quite satisfied. I would really recommend starting small with hardware you already have and then buy new hardware as you go along. I am also using Tailscale. With this you can get your initial setup up and running in a day and save money if it turns out home labbing isnt for you or you dont really need the hardware.

  • snekerpimp@lemmy.world
    link
    fedilink
    English
    arrow-up
    9
    ·
    7 months ago

    Any old Dell desktop/workstation/server should reach those specs. Poweredge rX30 and up, precision XX20/30 and up or optiplex (don’t know or understand that product line). Most of them are being rescued from the landfill. Might have to spend a crap ton over your budget, like 5-10x over, but you will get those specs.

    Look at an r430 barebones, no cpu/ram and build from there using spec sheets from Dell on what it takes. I was able to get one for $400 3 years back, even came with 16gb of ram and a single 10 core Xeon e5-v3.

    Also, what are you doing that need these kinds of specs? Running more than 10 VMs at once? Cloud gaming? Form follows function.

  • PeachMan@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    7 months ago

    If your budget is $150, then you need to look for used options on eBay. Look for Dell Optiplex or Lenovo ThinkCentre towers. You will not find specs that good in your price range. But maybe you can get a decent CPU and save money to upgrade your RAM later.

    MAYBE you’ll get lucky and find an old Dell server on eBay. Sometimes IT guys will sell their company’s old server for a profit. But I personally wouldn’t buy one of those, the monthly electricity costs are stupid.

  • mastod0n@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    7 months ago

    Honestly, when it comes to your specified amount of Cores & RAM you’ll have tough luck. Got myself a MiniPC with 5700U and 32GB of RAM, two 1TB SSDs (mirrored) and 3 NIC but that was still 500€ after waiting for a decent deal.

    Even buying a used PC off eBay will most likely cost far more if you insist on your specs.